Search the Site

Product Sections

New Products

Nylon Wall Plugs 8mm - Box of 100

150 dia Plastic Supply/Exhaust Valves

2mm Wire Rope 150m Reel

Wires with Carabina 2mm x 2m - Pack of 10

Shield Anchors M8

Ductwrap - Isover ClimCover Alu2 25mm 18m Roll

Please note we are currently unable to dispatch to Northern Ireland due to high carriage costs.Please note that we no longer accept Paypal payments.

Spigot Plates

Ventilation Ducting | Fabricated Round Fittings | Spigot Plates

Spigot Plates
SPG

Male fitting spigot plates. IL flanged spigot spot-welded to plate.

Up to 250 dia the plate size is determined as spigot size + 100mm. 300 dia and above the plate size is determined as spigot size + 150mm, unless requested otherwise.

These are generally made to order: you can use the 'Any other info' box to request specific size requirements if need be.

OUT OF STOCK

Spigot size

Any other info (optional):

Quantity:

People who bought this item also bought:

1. Spiral Tube - 3m Lengths (Ref: SR)

2. Rectangular Duct Straight 300x250mm (Ref: RDS300-250)

3. Split Ring Supports (Ref: SPR)

Circular Spigot Plates
CSPG

Male fitting spigot plates. IL flanged spigot spot-welded to circular plate.

Up to 250 dia the outer diameter size of the plate is determined as spigot size + 100mm. 300 dia and above the outer diameter size is determined as spigot size + 150mm, unless requested otherwise.

OUT OF STOCK

Spigot size

Any other info (optional):

Quantity:

People who bought this item also bought:

1. Anchors (Ref: ANC)

2. Penny Washers (Ref: PW)

3. Female Couplers (Ref: MF)

Spigot Plates - Fabricated
SPGF

Zinc-plated mild steel duct spigot plates. Male and female.

Up to 250 dia the plate size is determined as spigot size + 100mm. 300 dia and above the plate size is determined as spigot size + 150mm, unless requested otherwise. e.g. a 150 dia spigot will be on a 250x250 square plate; a 400 dia spigot will be on a 550x550 square plate.

These are generally made to order: you can use the 'Any other info' box to request specific size requirements if need be.

OUT OF STOCK

Spigot size

Specify spigot type

Any other info (optional):

Quantity:

People who bought this item also bought:

1. Duct Flanges - Fabricated (Ref: CDF)

2. 150 dia In Duct Non-return Damper with Seals (Ref: DAOSL-IN-150)

3. Fast Clamps (Ref: FC)

Wall Plates
WPT

Zinc-plated mild steel, 0.9mm. Actual default hole size is determined as nominal size + 4-6mm to allow them to fit comfortably over spiral tube. e.g. a 150mm dia as selected will have a hole of approx. 154mm. We are now producing these with a slight radius on the corners for a neater look. You can, if you wish, define the radius in the "Any other info" box below.
,
Up to 250 dia the plate size is determined as nominal hole size + 100mm. 300 dia and above the plate size is determined as nominal hole size + 150mm. e.g. a 150 dia plate will measure 250x250 overall; a 400 dia will measure 550x550 overall.

If you wish to change any dimensions of the plate, please use the 'Any other info' box below. A large divergence from the default sizes may result in an extra charge.

OUT OF STOCK